Calcium Chloride Anhydrous Dihydrate Hexahydrate Manufacturers

Anmol Chemicals is the pioneer manufacturers of Calcium Chloride, Pharmaceutical Excipients Food & Flavor chemicals in India. We offer Halal and Kosher Calcium Chloride made in an ISO9001, ISO22000 (FSSC22000) and cGMP GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Calcium Chloride is in these pages.

The units have one or more of the certifications like FDA GMP GLP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Calcium Chloride Dihydrate Fused Powder Pellets Granules Anhydrous Hexahydrate Solution BP Ph Eur USP Analytical Reagent FCC Food Grade Manufacturers

CAS No 10043-52-4, EC EINECS No 233-140-8, Molecular Weight 110.98, Chemical Formula CaCl2 for Calcium Chloride Anhydrous
CAS No 10035-04-8, EC EINECS No 233-140-8, Molecular Weight 147.02, Chemical Formula CaCl2-2H2O for Calcium Chloride Dihydrate
CAS No 7774-34-7, Molecular Weight 219.07, Chemical Formula CaCl2-6H2O for Calcium Chloride Hexahydrate

Calcium Chloride Anhydrous	Calcium Chloride Dihydrate
93% min. CaCl2 Calcium Chloride Anhydrous	97 to 103% as CaCl2.2H2O Di-hydrate
Arsenic (As)= 0.0003% max. 3 ppm. max.	Arsenic (As)= 0.0003% max. <3 ppm
Lead (Pb)= 0.001% max. 10 ppm. max.	Lead (Pb)= 0.001% max. <10 ppm.
Heavy Metal as (Pb)= 0.0003% max. 3 ppm. max.	Heavy Metal as (Pb)= 0.0003% max. <3 ppm.
Magnesium/Alkali= 1% max	Magnesium/Alkali= 1% max.
Clarity of 10% Solution= Clear & Colorless	Clarity of 10% Solution= Clear & Colorless
Free Acid or Alkali= 0.005% max. & pH 4.5-9 0.2ml of 0.01M HCl/NaOH to 10ml of 10%	Free Acid or Alkali= 0.005% max. & pH 4.5-9 0.2ml of 0.01M HCl/NaOH to 10ml of 10%

CaCl2.2H2O EXTRA PURE; Analytical Reagent SPECIFICATIONS.
Assay Calcium Chloride Dihydrate CaCl2.2H2O	97%-103%. as CaCl2.2H2O Calcium Chloride Dihydrate
Free Acid or Alkali	0.005% Max. as HCl OR Ca(OH)2.
Sulphate (SO4)	0.01% Max.
Iron	0.001% Max.
Magnesium	0.05% Max.

CaCl2.6H2O EXTRA PURE; Analytical Reagent Specifications.
Assay as Calcium Chloride Hexahydrate	99%-101%. as CaCl2.6H2O Calcium Chloride Hexahydrate
Free Acid or Alkali	0.005% Max. as HCl OR Ca(OH)2.
Sulphate (SO4)	0.01% Max.
Iron	0.001% Max.
Magnesium	0.05% Max.

CaCl2.6H2O EXTRA PURE; Analytical Reagent SPECIFICATIONS.
Assay as Calcium Chloride Hexahydrate	30%. as CaCl2 is recommended. up to 50% CaCl2 solution can be given
Appearance	Clear & water white.
pH	7-8 (pH can be adjusted as required)
Iron	0.001% Max

Calcium Chloride FCC Food Grade
CaCl2 Formula weight, anhydrous 110.98
CaCl2-2H2O Formula weight, dihydrate 147.01

DESCRIPTION
Calcium Chloride occurs as white, hard fragments, granules, or powder. It is anhydrous or contains two molecules of water of hydration. It is deliquescent. It is soluble in water and slightly soluble in alcohol. The pH of a 1:20 aqueous solution is between 4.5 and 11.0.
Function Firming agent.

REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Calcium and for Chloride.
Assay: Anhydrous: Not less than 93.0% and not more than 100.5% of CaCl2; Dihydrate: Not less than 99.0% and not more than 107.0% of CaCl2·2H2O.
Acid-Insoluble Matter Anhydrous: Not more than 0.02%; no particles per kilogram of sample greater than 2 mm in any dimension.
Arsenic: Not more than 3 mg/kg.
Fluoride: Not more than 0.004%.
Lead: Not more than 5 mg/kg.
Magnesium and Alkali Salts Anhydrous: Not more than 5.0%; Dihydrate: Not more than 4.0%.

DESCRIPTION
Calcium Chloride Solution occurs as a clear to slightly turbid, colorless or slightly colored liquid at room temperature. It is normally available in a concentration range of about 35% to 45% of CaCl2.
Function: Sequestrant; firming agent.

REQUIREMENTS
Identification: When diluted to a concentration of about 1:10 (CaCl2 basis), a sample gives positive tests for Calcium and for Chloride.
Assay: Not less than 90.0% and not more than 110.0%, by weight, of the labeled amount of calcium chloride, expressed as CaCl2.
Alkalinity [as Ca(OH)2]: Not more than 0.3%.
Fluoride: Not more than 0.004%, calculated on the amount of CaCl2 as determined in the Assay.
Lead: Not more than 4 mg/kg, calculated on the amount of CaCl2 as determined in the Assay.
Magnesium and Alkali Salts: Not more than 5.0%, calculated on the amount of Calcium Chloride as determined in the Assay.

Calcium Chloride Dihydrate Analytical Reagent
CaCl2-2H2O
Formula Weight 147.01
CAS Number 10035-04-8

REQUIREMENTS
Assay: 99.0-105.0% CaCl2-2H2O
pH of a 5% solution: 4.5-8.5 at 25C

MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Oxidizing substances (as NO3): 0.003%
Sulfate (SO4): 0.01%
Ammonium (NH4): 0.005%
Barium (Ba): 0.005%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 0.001%
Magnesium (Mg): 0.005%
Potassium (K): 0.01%
Sodium (Na): 0.02%
Strontium (Sr): 0.1%

Assay: Calcium Chloride contains an amount of CaCl2 equivalent to not less than 99.0 percent and not more than 107.0 percent of CaCl2·2H2O.
Identification: A solution (1 in 10) responds to the tests for Calcium and for Chloride.
pH: between 4.5 and 9.2, in a solution (1 in 20).
Aluminum (where it is labeled as intended for use in hem dialysis): the limit is 1 4g per g.
Iron, aluminum, and phosphate: To a solution (1 in 20) add 2 drops of 3 N hydrochloric acid and 1 drop of phenolphthalein. Then add ammonium chloride–ammonium hydroxide, drop wise, until the solution is faintly pink, add 2 drops in excess, and heat the liquid to boiling: no turbidity or precipitate is produced.
Heavy metals: the limit is 0.001%.
Limit of magnesium and alkali salts: Dissolve 1 g in about 50 mL of water, add 500 mg of ammonium chloride, and proceed as directed in the test for Limit of magnesium and alkali salts under Calcium Carbonate, beginning with “heat the solution, and boil for 1 minute”: the weight of the residue does not exceed 5 mg (1.0%).
Organic volatile impurities meets the requirements.

Calcium Chloride BP Ph Eur Dihydrate Specifications
Calcium Chloride BP Dihydrate
CaCl2-2H2O

CHARACTERS
Appearance: White or almost white, crystalline powder, hygroscopic.
Solubility: Freely soluble in water, soluble in ethanol (96 per cent).

IDENTIFICATION
Solution S (see Tests) gives reaction of chlorides.
It gives the reactions of calcium.
It complies with the limits of the assay.

TESTS
Solution S: Dissolve 10.0 g in carbon dioxide-free water prepared from distilled water and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and not more intensely colored than reference solution.
Acidity or alkalinity: To 10 ml of freshly prepared solution S add 0.1 ml of phenolphthalein solution. If the solution is red, not more than 0.2 ml of 0.01 M hydrochloric acid is required to discharge the color and if the solution is colorless, not more than 0.2 ml of 0.01 M sodium hydroxide is required to turn it red.
Sulphates: Maximum 300 ppm.
Aluminium: To 10 ml of solution S add 2 ml of ammonium chloride solution R and 1 ml of dilute ammonia and boil the solution. No turbidity or precipitate is formed.
If intended for use in the manufacture of dialysis solutions, the above test is replaced by the test for Aluminium maximum 1 ppm.
Barium: To 10 ml of solution S add 1 ml of calcium Sulphate solution R. After at least 15 min, any opalescence in the solution is not more intense than that in a mixture of 1 ml of distilled water and 10 ml of solution S.
Iron: Maximum 10 ppm, determined on solution S.
Magnesium and alkali metals: Maximum 0.5 per cent.
Heavy metals: Maximum 20 ppm.

Calcium Chloride Hexahydrate BP Ph Eur Specifications
Calcium Chloride BP Hexahydrate
CaCl2-6H2O

CHARACTERS
Appearance: White or almost white, crystalline mass or colorless crystals.
Solubility: Very soluble in water, freely soluble in ethanol (96 per cent).
It solidifies at about 29C.

IDENTIFICATION
Solution S (see Tests) gives reaction of chlorides.
It gives the reactions of calcium.
It complies with the limits of the assay.

TESTS
Solution S: Dissolve 15.0 g in carbon dioxide-free water prepared from distilled water R and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and not more intensely colored than reference solution.
Acidity or alkalinity: To 10 ml of freshly prepared solution S add 0.1 ml of phenolphthalein solution. If the solution is red, not more than 0.2 ml of 0.01 M hydrochloric acid is required to discharge the color and if the solution is colorless, not more than 0.2 ml of 0.01 M sodium hydroxide is required to turn it red.
Sulphates: Maximum 200 ppm.
Aluminium: To 10 ml of solution S add 2 ml of ammonium chloride solution R and 1 ml of dilute ammonia R1 . Heat to boiling. No turbidity or precipitate is formed. If intended for use in the manufacture of dialysis solutions, the above test is replaced by the test for Aluminium : maximum 1 ppm.
Barium: To 10 ml of solution S add 1 ml of calcium Sulphate solution. After at least 15 min, any opalescence in the solution is not more intense than that in a mixture of 1 ml of distilled water and 10 ml of solution S.
Iron: Maximum 7 ppm, determined on solution S.
Magnesium and alkali metals: Maximum 0.3 per cent.
Heavy metals Maximum 15 ppm.

Exporters to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, etc.

Calcium Chloride Fused Anhydrous Lumps Pellets Powder Brine Solution BP Ph Eur USP Analytical Reagent FCC Food grade manufacturers:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

Calcium Chloride Fused; Hard Solid or Porous Fused	Calcium Chloride Anhydrous
Calcium Chloride Hard Solid 72-75% or 80% Porous Fused Assay	Calcium Chloride Anhydrous 94-98% Assay
Appearance White Lumps	Appearance White Lumps or Powder
Magnesium 0.3% max.	Magnesium 0.3% max.
Iron 100 ppm max.	Iron 100 ppm max.
Dry Basis Assay 98% min.	Dry Basis Assay 98% min.
In 50 Kgs. HDPE bag with HMHDP liner.	In 50 Kgs. HDPE bag with HMHDP liners