Anmol Chemicals is Group, established in 1976, is the pioneer manufacturer of Aluminium Aluminum Chloride Hexahydrate Anhydrous. It has (FDA) GMP-GLP approval, ISO-9001 Certificate, "REACH" Pre-registration, ISO-22000 HACCP, Kosher Certificate and Halal Certificate.

Home ---------- Contact

ALUMINIUM CHLORIDE OR ALUMINUM CHLORIDE HEXAHYDRATE AND AHYYDROUS PURE & BP Ph Eur USP MANUFACTURERS

Drum Packing Palletized Drum Packing 25-50kg or 55lbs bags. Paletized and Shrink Wrapped. Exports to USA UAE Europe South Africa Tanzania Kenya Egypt Uganda Turkey Brazil Chile Argentina Dubai. Jumbo Bag Packing

CAS Number Hexahydrate 7784-13-6 and Anhydrous 7746-70-0
Aluminum Chloride Hexahydrate Manufacturers Aluminum Chloride Anhydrous Manufacturers
Aluminum Chloride Hexahydrate Anhydrous

Aluminum Chloride USP Grade Specifications
AlCl3-6H2O -- 241.43 -- [CAS 7784-13-6].

Aluminum Chloride contains not less than 95.0 percent and not more than 102.0 percent of AlCl3, calculated on the anhydrous basis.

Identification: A solution (1 in 10) responds to the tests for Aluminum and for Chloride.
Water: Between 42.0% and 48.0%.
Sulfate: The addition of 0.2 mL of barium chloride to 10 mL of a solution (1 in 100) produces no turbidity within 1 minute.
Limit of alkalies and alkaline earths: the limit is 0.5%.
Heavy metals: the limit is 0.002%.
Iron: the limit is 0.001%.


Aluminium Chloride Hexahydrate BP Grade Ph Eur Grade Specifications
AlCl3,6H2O -- 241.4 -- 7784-13-6

DEFINITION
Content: 95.0 per cent to 101.0 per cent.

CHARACTERS
Appearance: White or slightly yellow, crystalline powder or colourless crystals, deliquescent.
Solubility: Very soluble in water, freely soluble in ethanol (96 per cent), soluble in glycerol.

IDENTIFICATION
A. Dilute 0.1 ml of solution S2 (see Tests) to 2 ml with water. The solution gives reaction of chlorides.
B. Dilute 0.3 ml of solution S2 to 2 ml with water. The solution gives the reaction of aluminium.

TESTS
Solution S1: Dissolve 10.0 g in distilled water and dilute to 100 ml with the same solvent.
Solution S2: Dilute 50 ml of solution S1 to 100 ml with water.
Appearance of solution: Solution S2 is clear and not more intensely coloured than reference solution.
Sulphates: Maximum 100 ppm, determined on solution S1.
Iron: Maximum 10 ppm, determined on solution S1.
Alkali and alkaline-earth metals: Maximum 0.5 per cent.
Heavy metals: Maximum 20 ppm.
Water: 42.0 per cent to 48.0 per cent, determined on 50.0 mg.


Anhydrous Aluminum Chloride or Aluminium Chloride Anhydrous

Specifications of Anhydrous Aluminum Chloride or Aluminum Chloride Anhydrous

Aluminium Chloride Anhydrous Our Guaranteed
Assay, percent by mass, min 98.5%
Insoluble matter, percent by mass, max 0.4%
pH of 5% solution 3-4.5

Anhydrous Aluminium Chloride or Aluminum Chloride Anhydrous is available in two forms viz. Powder and Crystals:

Characteristic Aluminium Chloride Powder
Particle Size 0-2 mm
Colour Yellowish-Grey-Greenish
Odor Hydrochloric Acid Odor
Characteristic Aluminium Chloride Crystals
Particle Size 2-10 mm
Colour Yellowish-Grey-Greenish
Odor Hydrochloric Acid Odor

We also offer Calcium Butyrate, Calcium D-saccharate, Calcium Glycerophosphate, Calcium Lactobionate, Calcium Sulfate, Aluminum Chloride Anhydrous & Hexahydrate, Chromium Chloride Anhydrous & Hexahydrate and Ferric Chloride Anhydrous & Hexahydrate, Magnesium Chloride Hexahydrate Anhydrous.

Aluminium Aluminum Chloride Hexahydrate Anhydrous manufacturers at:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

Manufacturers India

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, etc.