Anmol Chemicals is Group, established in 1976, is the pioneer manufacturer of Zinc Chloride, Calcium Chloride etc. It has (FDA) GMP-GLP approval, ISO-9001 Certificate, "REACH" registration, ISO-22000 HACCP, Kosher Certificate and Halal Certificate.

Home ---------- Contact

Magnesium Chloride Hexahydrate and Anhydrous & BP Ph Eur USP FCC Food Analytical Reagent Manufacturers

Drum Packing Palletized Drum Packing 25-50kg or 55lbs bags. Paletized and Shrink Wrapped. Exports to USA UAE Europe South Africa Tanzania Kenya Egypt Uganda Turkey Brazil Chile Argentina Dubai. Jumbo Bag Packing

Magnesium Chloride Hexahydrate CAS Number 7791-18-6 & Magnesium Chloride Anhydrous CAS Number 7786-30-3
Magnesium Chloride Hexahydrate Manufacturers Exporters Magnesium Chloride Anhydrous Manufacturers Exporters
Magnesium Chloride Hexahydrate and Anhydrous

We offer very low moisture Magnesium Chloride Anhydrous with moisture less than 0.5% and also Magnesium Chloride Anhydrous sterilized for bacterial count and Drybasis assay of 99.99%.

Magnesium Chloride USP
MgCl2.6H2O --- 203.30
Magnesium Chloride Hexahydrate [CAS 7791-18-6].
Magnesium Chloride Anhydrous [CAS 7786-30-3].

Magnesium Chloride contains not less than 98.0 percent and not more than 101.0 percent of MgCl2·6H2O.

Identification: A solution (1 in 20) responds to the tests for Magnesium and for Chloride
pH: between 4.5 and 7.0, in a 1 in 20 solution in carbon dioxide-free water.
Insoluble matter: not more than 0.005% is found.
Sulfate: A 10-g portion shows no more sulfate than corresponds to 0.50 mL of 0.020 N sulfuric acid (0.005%).
Barium: Dissolve 1 g in 10 mL of water, and add 1 mL of 2 N sulfuric acid: no turbidity is produced within 2 hours.
Limit of calcium: the limit is 0.01%.
Potassium: Dissolve 5 g in 5 mL of water, and add 0.2 mL of sodium bitartrate TS: no turbidity is produced within 5 minutes.
Aluminum (where it is labeled as intended for use in hem dialysis): the limit is 1 µg per g.
Heavy metals: the limit is 0.001%.
Organic volatile impurities: meets the requirements.


Magnesium Chloride BP

MgCl2.6H2O
Magnesium Chloride Hexahydrate [CAS 7791-18-6].
Magnesium Chloride Anhydrous [CAS 7786-30-3].

DEFINITION
Content: 98.0 per cent to 101.0 per cent of MgCl2,6H2O.

CHARACTERS
Appearance: Colourless crystals, hygroscopic.
Solubility: Very soluble in water, freely soluble in ethanol (96 per cent).

IDENTIFICATION
Water % (see Tests).
It gives reaction of chlorides.
It gives the reaction of magnesium.

TESTS
Solution S: Dissolve 10.0 g in carbon dioxide-free water R prepared from distilled water and dilute to 100.0 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
Acidity or alkalinity: To 5 ml of solution S add 0.05 ml of phenol red solution R. Not more than 0.3 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator.
Bromides: Maximum 500 ppm.
Sulphates: Maximum 100 ppm, determined on solution S.
Aluminium: Maximum 1 ppm, if intended for use in the manufacture of peritoneal dialysis solutions, hem dialysis solutions, or haemofiltration solutions.
Arsenic: Maximum 2 ppm, determined on 0.5 g.
Calcium: Maximum 0.1 per cent.
Iron: Maximum 10 ppm, determined on solution S.
Potassium: Maximum 5.0 × 102 ppm, if intended for use in the manufacture of parenteral dosage forms.
Atomic emission spectrometry: Passes the test
Heavy metals: Maximum 10 ppm.
Water: 51.0 per cent to 55.0 per cent, determined on 50.0 mg.


Magnesium Chloride FCC Fod Grade, US Food Chemical Codex

MgCl2-6H2O Formula weight 203.30

DESCRIPTION
Magnesium Chloride occurs as colorless flakes or crystals. It contains six molecules of water of hydration. It is hygroscopic, very soluble in water, and freely soluble in alcohol.
Function: Color-retention agent; firming agent.

REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Magnesium and for Chloride.
Assay: Not less than 99.0% and not more than 105.0% of MgCl2·6H2O.
Ammonium: Not more than 0.005%.
Lead: Not more than 4 mg/kg.
Sulfate: Not more than 0.03%.


We offer very low moisture Magnesium Chloride Anhydrous with moisture less than 0.5% and also Magnesium Chloride Anhydrous sterilized for bacterial count and Drybasis assay of 99.99%.

We also offer Calcium Butyrate, Calcium D-saccharate, Calcium Glycerophosphate, Calcium Lactobionate, Calcium Sulfate, Aluminum Chloride Anhydrous & Hexahydrate, Chromium Chloride Anhydrous & Hexahydrate and Ferric Chloride Anhydrous & Hexahydrate, Magnesium Chloride Hexahydrate Anhydrous.

Magnesium Chloride Hexahydrate Anhydrous BP Ph Eur USP FCC Food Analytical Reagent manufacturers at:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

Manufacturers India

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, etc.