Anmol Chemicals is Group, established in 1976, is the pioneer manufacturer of Ferric chloride hexahydrate and anhydrous. It has (FDA) GMP-GLP approval, ISO-9001 Certificate, "REACH" Pre-registration, ISO-22000 HACCP, Kosher Certificate and Halal Certificate.

Home ---------- Contact

Drum Packing Palletized Drum Packing 25-50kg or 55lbs bags. Paletized and Shrink Wrapped. Exports to USA UAE Europe South Africa Tanzania Kenya Egypt Uganda Turkey Brazil Chile Argentina Dubai. Jumbo Bag Packing Iron Ferric Chloride Hexahydrate Manufacturers Iron Ferric Chloride Anhydrous Manufacturers

IRON CHLORIDE OR FERRIC CHLORIDE HEXAHYDRATE AND AHYYDROUS PURE & BP Ph Eur ACS REAGENT MANUFACTURERS

We offer Ferric Chloride Anhydrous Pure and Iron Chloride Hexahydrate Pure and BP Grade.

Ferric Chloride Hexahydrate BP Grade Ph Eur
FeCl3,6H2O -- 270.3 -- 10025-77-1

DEFINITION
Content: 98.0 per cent to 102.0 per cent.

CHARACTERS
Appearance: Crystalline mass or orange-yellow or brownish-yellow crystals, very hygroscopic.
Solubility: Very soluble in water and in ethanol (96 per cent), freely soluble in glycerol.

IDENTIFICATION
A. It gives reaction of chlorides.
B. It gives reaction of iron.

TESTS
Solution S: Dissolve 10 g in distilled water and dilute to 100 ml with the same solvent.
Acidity: In a suitable polyethylene container, dissolve 3.0 g of potassium fluoride in 15 ml of water. Titrate with 0.1 M sodium hydroxide using 0.1 ml of phenolphthalein solution as indicator until a pink colour is obtained. Add 10 ml of solution S and allow to stand for 3 h. Filter and use 12.5 ml of the filtrate. Not more than 0.30 ml of 0.1 M sodium hydroxide is required to change the colour of the indicator to pink.
Free chlorine: Heat 5 ml of solution S. The vapour does not turn starch iodide paper blue.
Sulphates: Maximum 100 ppm.
Ferrous ions: Maximum 50 ppm.
Heavy metals: Maximum 50 ppm.

Ferric Chloride Hexahydrate ACS AR Reagent Grade
Iron(III) Chloride Hexahydrate
FeCl3-6H2O
Formula Weight 270.30
CAS Number 10025-77-1

REQUIREMENTS
Assay: 97.0-102.0% FeCl3- 6H2O

MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Nitrate (NO3): 0.01%
Phosphorus compounds (as PO4): 0.01%
Sulfate (SO4): 0.01%
Copper (Cu): 0.03%
Zinc (Zn): 0.03%
Ferrous iron (Fe++): Passes test

Substances not precipitated by ammonium hydroxide (as sulfates): 0.1%

Specifications of Ferric Chloride Anhydrous:
Appearance: Greenish to Black, Crystalline powder
FeCl3 Assay: 98 %
Ferrous Salt as FeCl2: 0.10 % max
Insolubles: 0.50 % max.
Specific Gravity@25°C: 2.80
Molecular weight: 162.5
Melting Point: 282°C
Solubility: miscible in water.

We also offer Calcium Butyrate, Calcium D-saccharate, Calcium Glycerophosphate, Calcium Lactobionate, Calcium Sulfate, Aluminum Chloride Anhydrous & Hexahydrate, Chromium Chloride Anhydrous & Hexahydrate and Ferric Chloride Anhydrous & Hexahydrate, Magnesium Chloride Hexahydrate Anhydrous.

Iron Ferric Chloride Hexahydrate Anhydrous manufacturers at:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

Manufacturers India

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, etc.

Copyright. March 2, 2022