Sodium Acetate Manufacturers Trihydrate Anhydrous

Anmol Chemicals is Group, established in 1976, is the pioneer manufacturer of Zinc Chloride, Calcium Chloride etc. It has (FDA) GMP-GLP approval, ISO-9001 Certificate, "REACH" registration, ISO-22000 HACCP, Kosher Certificate and Halal Certificate.

Sodium Acetate Anhydrous

SPECIFICATIONS	SODIUM ACETATE TRIHYDRATE PURE	SODIUM ACETATE TRIHYDRATE TECHNICAL
Assay	99% Sodium Acetate Trihydrate minimum	98% Sodium Acetate Trihydrate minimum
Appearance	White Transparent Crystalline	Off-White Crystalline
Test Solution	A 10% Solution is clear & colourless	A 10% Solution is clear & colourless
pH	7.5-9	7.5-9
Arsenic	Less than 1 ppm	Less than 1 ppm
Calcium & Magnesium	Less than 50 ppm	Less than 100 ppm
Heavy Metals	Less than 1 ppm	Less than 10 ppm
Iron	Less than 5ppm	Less than 10 ppm
Chlorides	Less than 0.03%	Less than 0.5%
Sulphates	Less than 0.02%	Less than 0.5%
Packing	As required	As required

SPECIFICATIONS	SODIUM ACETATE ANHYDROUS PURE	SODIUM ACETATE ANHYDROUS TECHNICAL
Purity	99 % minimum purity as CH3COONa	98.5% minimum purity as CH3COONa
Appearance	Snow-White Powder	White to Off-White Powder
Clarity of 10% Solution	A 10% Solution w/v is clear and colourless	A 10% Solution w/v is clear
pH (10% in water)	pH between 7.5-9	pH between 7.5-9
Arsenic	Arsenic < 1ppm.	Arsenic < 1ppm.
Calcium and Magnesium	To pass the test 50 ppm	To pass the test 100 ppm
Heavy Metals	Heavy Metals < 1ppm	Heavy Metals < 10ppm
Iron	Iron < 5ppm	Iron < 10ppm
Chloride	Chloride < 100ppm	Chloride <0.5%
Sulphate < 225ppm	Sulphate < 20ppm	Sulphate <0.5%
Packing	25kg(55 lbs)-50kg bags or pellets or as required

We offer Sodium Acetate IP Sodium Acetate BP Sodium Acetate USP Sodium Acetate Ph. Eur. and Extra Pure from a world class FDA approved, ISO-9001-2008 Certified facility

PARTICULARS	SODIUM ACETATE IP GRADE
Dry Basis Assay	99 to 101%
Characteristics	Colourless Crystals
Solubility	Soluble in 0.8 part of water and in 19 parts of Ethanol (96%)
Clarity and colour of 10% w/v solution	Clear and Colourless
Alkalinity (pH of 5% solution)	7.5-9.0
Arsenic	2 ppm
Calcium and Magnesium (calculated as Ca)	50 ppm
Heavy Metals as Lead	10 ppm
Iron	10 ppm
Chloride	200 ppm
Sulphate	200 ppm
Reducing Substances	Passes test
Packing	In 50 Kg HDPE bag with HMHDPE liner

Assay— Sodium Acetate contains three molecules of water of hydration, or is anhydrous. It contains not less than 99.0 percent and not more than 101.0 percent of C2H3NaO2, calculated on the dried basis.
Packaging and storage— Preserve in tight containers.
Labeling— Label it to indicate whether it is the trihydrate or is anhydrous. Where Sodium Acetate is intended for use in hem dialysis, it is so labeled.
Identification— A solution responds to the test for Sodium and for Acetate.
pH: between 7.5 and 9.2, in a solution in carbon dioxide-free water containing the equivalent of 30 mg of anhydrous sodium acetate per mL.
Loss on drying— Dry at 120 to constant weight: the hydrous form loses between 38.0% and 41.0% of its weight, and the anhydrous form loses not more than 1.0% of its weight.
Insoluble matter— Dissolve the equivalent of 20 g of anhydrous sodium acetate in 150 mL of water, heat to boiling, and digest in a covered beaker on a steam bath for 1 hour. Filter through a tarred filtering crucible, wash thoroughly, and dry at 105 : the weight of the residue does not exceed 10 mg (0.05%).
Chloride— A portion equivalent to 1.0 g of anhydrous sodium acetate shows no more chloride than corresponds to 0.50 mL of 0.020 N hydrochloric acid (0.035%).
Sulfate— A portion equivalent to 10 g of anhydrous sodium acetate shows no more sulfate than corresponds to 0.50 mL of 0.020 N sulfuric acid (0.005%).
Calcium and magnesium— To 20 mL of a solution containing the equivalent of 10 mg of anhydrous sodium acetate per mL add 2 mL each of 6 N ammonium hydroxide, ammonium oxalate TS, and dibasic sodium phosphate TS: no turbidity is produced within 5 minutes.
Potassium— Dissolve the equivalent of 3 g of anhydrous sodium acetate in 5 mL of water, add 1N acetic acid drop wise until the solution is slightly acidic, and then add 5 drops of sodium cobalt nitrite TS: no precipitate is formed.
Aluminum: (where it is labeled as intended for use in hem dialysis)— the limit is 0.2µ =g per g.
Heavy metals—the limit is 0.001%.
Organic volatile impurities: meets the requirements.

It is sometimes produced in a laboratory experiment by the reaction of acetic acid with sodium carbonate, sodium bicarbonate, or sodium hydroxide. These reactions produce sodium acetate (aq), water, and carbon dioxide, which leaves the reaction vessel as a gas, is produced by the first two.

This is the well-known "fizzing" reaction between baking soda and vinegar. 84 grams of sodium bicarbonate react with 750 g of 8% vinegar to make 82 g sodium acetate in water. By subsequently boiling off most of the water, one can refine either a concentrated solution of sodium acetate or actual crystals.

Sod. acetate can be used to form an ester with an alkyl halide such as bromoethane:

In such a reaction, the sodium acetate is usually complexed with caesium in order to increase the nucleophilicity of the carboxylate group.

For an exhaustive Write-up on the product Manufacture, Specifications, Uses, Applications, MSDS etc. please visit:

Sodium Acetate manufacturer at:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, etc.